Configuration

The Widget configuration is stored on the sdcard in the file "params.txt"

 Widget Parameters
 Description
 dmxusbpro_break_time DMX output break time in 10.67 microsecond units. Valid range is 9 to 127. (default = 9)
 dmxusbpro_mab_time DMX output Mark After Break time in 10.67 microsecond units. Valid range is 1 to 127. (default = 1)
 dmxusbpro_refresh_rate DMX output rate in packets per second. 0 for fastest rate possible. (default = 40)
 dmx_send_to_host_throttle DMX receive rate throttling option in updates per second. 0 is as fast as possible. (default = 0)
 widget_mode See table below for the supported values

 "widget_mode" Description
 0 Mode 1 + 2
 1 Normal DMX firmware. Supports all messages except Send RDM (label=7), Send RDM Discovery Request(label=11) and receive RDM .
 2 RDM firmware. This enables the Widget to act as an RDM Controller. (default)
 3 RDM Sniffer firmware. This is for use with the Openlighting RDM packet monitoring application.

Example:
#dmxusbpro_break_time=
#dmxusbpro_mab_time=
#dmxusbpro_refresh_rate=0
widget_mode=0
#dmx_send_to_host_throttle=20

The RDM device configuration is stored on the sdcard in the file "rdm_device.txt"

 NameDescription
 manufacturer_name Manufacturer Name (maximum length is 32 characters). Widget Label = 77
 manufacturer_id Manufacturer ID : http://tsp.plasa.org/tsp/working_groups/CP/mfctrIDs.php
 device_label Descriptive label for the device (maximum length is 32 characters). Widget Label = 78

Comments