Configuration

All parameters are optional. They all have a defined default value.

Wifi
: The Access Point configuration is stored on the sdcard in the file "ap.txt".

Parameter name
 Description
 password
 Maximum length is 32 characters. (default = <blank>)

When the file "ap.txt" is omitted or the password is <blank>, then the AP authentication mode is Open. Otherwise it is : WPA2 PSK
Only 2 connections are allowed.

The network configuration is stored on the sdcard in the file "network.txt".

Parameter name
 Description
 dhcp
 0 = fixed IP , 1 = DHCP (default = 1)

Example:
use_dhcp=0
ip_address=192.168.0.250
net_mask=255.255.255.0
default_gateway=192.168.0.1
name_server=192.168.0.1

Wifi : When there is no file "network.txt" then the node acts as a Wifi Access Point.

Example Wifi:
ssid=MYSSID
password=secret

The sACN E1.31 configuration is stored on the sdcard in the file "e131.txt".

Parameter name
 Description
 universe
 The Universe is a 16-bit field that defines the universe number of the data carried in the packet. Universe
 values shall be limited to the range 1 to 63999.  (default = 1)
 output dmx (default) / mon = DMX Real-time monitor

The DMX configuration is stored on the sdcard in the file "params.txt".

Parameter name
 Description
 dmxsend_break_time DMX output Break time in microseconds. Valid range is 92 to 176. (default = 92)
 dmxsend_mab_time DMX output Mark After Break time in microseconds. Valid range is 12 to 1000000. (default = 12)
 dmxsend_refresh_rate DMX output rate in packets per second. 0 for fastest rate possible. (default = 40)

Example:
#dmxsend_break_time=
#dmxsend_mab_time=
dmxsend_refresh_rate=0
Comments