Supported PIDs

The tables below are applicable to the RDM Responder implementations.

Root device

 PID GET
SET
Implementation note
 E120_QUEUED_MESSAGE √  
 E120_SUPPORTED_PARAMETERS    
 E120_DEVICE_INFO    
 E120_PRODUCT_DETAIL_ID_LIST √  
 E120_DEVICE_MODEL_DESCRIPTION    
 E120_MANUFACTURER_LABEL    
 E120_DEVICE_LABEL
 
 E120_FACTORY_DEFAULTS  
 E120_LANGUAGE_CAPABILITIES  √    
 E120_LANGUAGE  √
 
 E120_SOFTWARE_VERSION_LABEL
   
 E120_BOOT_SOFTWARE_VERSION_ID
   
 E120_BOOT_SOFTWARE_VERSION_LABEL
   
 E120_DMX_PERSONALITY

 
 E120_DMX_PERSONALITY_DESCRIPTION
   
 E120_DMX_START_ADDRESS

 
 E120_SLOT_INFO √   
 E120_SLOT_DESCRIPTION √   
 E120_SENSOR_DEFINITION    
 E120_SENSOR_VALUE  √  √  
 E120_RECORD_SENSORS    √  
 E120_DEVICE_HOURS
 
 E120_REAL_TIME_CLOCK
 
 E120_IDENTIFY_DEVICE
 
 E120_RESET_DEVICE    
 E120_POWER_STATE √  √ Not all options are implemented
 E137_1_IDENTIFY_MODE √ √ 
 

Sub-devices
 PID GET
SET
Implementation note
 E120_SUPPORTED_PARAMETERS    
 E120_DEVICE_INFO    
 E120_PRODUCT_DETAIL_ID_LIST √  
 E120_SOFTWARE_VERSION_LABEL
   
 E120_DMX_PERSONALITY

 
 E120_DMX_PERSONALITY_DESCRIPTION
   
 E120_DMX_START_ADDRESS

 
 E120_IDENTIFY_DEVICE
 

OLA command-line interface
pi@openlighting-3:~ $ ola_rdm_get --universe 0 --uid 7ff0:ebf43844 supported_parameters
  0x0020 (queued_message)
  0x0070 (product_detail_id_list)
  0x0080 (device_model_description)
  0x0081 (manufacturer_label)
  0x0082 (device_label)
  0x0090 (factory_defaults)
  0x00a0 (language_capabilities)
  0x00b0 (language)
  0x00c1 (boot_software_version_id)
  0x00c2 (boot_software_version_label)
  0x00e0 (dmx_personality)
  0x00e1 (dmx_personality_description)
  0x0120 (slot_info)
  0x0121 (slot_description)
  0x0200 (sensor_definition)
  0x0201 (sensor_value)
  0x0202 (record_sensors)
  0x0400 (device_hours)
  0x0603 (real_time_clock)
  0x1001 (reset_device)
  0x1010 (power_state)
  0x1040 (identify_mode)

Comments