Open Source Pi DMX-512, Art-Net 4, sACN E1.31, RDM, Pixels, MIDI, SMPTE & OSC
Search this site
Navigatie
Orange Pi
Contact
Displays
User Defined Format
External links
GPIO Header
Network configuration
Ethernet
Wifi
Updating Wifi firmware
RDM
Built-in supported Sensors
Built-in supported Sub-devices
Supported PIDs
Remote Configuration Management for SPI flash
Configuration
Example Java UI
SPI flash boot process
System time
WS28xx/APA102/UCSx903/TLC59711 configuration
Prototype boards
Multi port pixel prototype boards
4 Output (4x 4 Universes)
BOM
Schematic and board
8 Output (8x 4 Universes)
Single port pixel board (1X 4 Universes)
BOM
Schematic and board
Technical details
1. Art-Net 4 Node : DMX Out / RDM Controller / Pixel Controller
Configuration
Successfully tested
2. sACN E1.3 Bridge : DMX Out / Pixel Controller
Configuration
Successfully tested
3. OSC Bridge : DMX out / Pixel Controller
Configuration
Successfully tested
4. Orange Pi Zero / Raspberry Pi : DMX USB Pro
Configuration
Firmware
RDM isolated board with USB (FT245RL)
Successfully tested
5. Orange Pi One Real-time Monitor's
Configuration
successfully-tested
6. RDM Responder / Pixel Controller
Configuration
Firmware
OLA RDM Responder Tests
RDM isolated board
Successfully tested
7. MIDI Real-time Monitor
Configuration
Successfully tested
8. Raspberry Pi MIDI->DMX Bridge
Configuration
Successfully tested
9. LTC SMPTE Timecode Reader / Converter / Generator
Configuration
Displays
Configuration
MAX7219
ws28xx-7-segment
Run-time UDP messages
Internal TimeCode generator
Buttons
MA2 LUA
Run-time OSC messages
Run-time UDP messages
Schematic and board
Source selection buttons
Successfully tested
TCNet
A. Raspberry Pi Linux ArtIpProg
Configuration
Infrared remote control module
L. Linux ArtNet, sACN, OSC
Configuration
O. OSC Client
Buttons and led's
Configuration
S. Orange Pi DMX/RDM Stepper Controller
Built-in Operation Modes
Configuration
OLA RDM Responder Tests
Successfully tested
Z. Allwinner H2+/H3 (sun8iw7p1)
|Archive|
1. Art-Net 3 Node : DMX Out / RDM Controller / Pixel Controller
Configuration
Raspberry Pi
Installation
OLA on the Raspberry Pi 3 (Jessie)
Raspberry Pi development environment
Raspberry Pi GPIO header
Videos
Sitemap
9. LTC SMPTE Timecode Reader / Converter / Generator
>
Displays
Supported display output:
OLED display 128 x 64 SSD1306 I2C (auto-detect)
LCD 16x2 I2C (auto-detect)
LCD 16x4 I2C (auto-detect)
MAX7219 8x 7-Segment display
MAX7219 4x Dot matrix module (2 pcs needed).
2-digits 7-segment
WS28xx 7-segment
Subpages
(3):
Configuration
MAX7219
ws28xx-7-segment
Comments