Workflow firmware installation

  1. Open Remote Config UI ->  $ java -jar RemoteConfigUI.jar
  2. Select target device from list
  3. Using menus, Action -> TFTP On/Off, confirm On.
  4. Using menus, Run -> TFTP Client
  5. Use "Select uImage" button to select the firmware to upload
  6. Use "TFTP put" button to upload firmware
  7. If success, text will turn green.
  8. Using menus, Action -> TFTP On/Off, confirm Off (firmware is now written to SPI flash)
  9. Right click on device, or use menus Action -> Reboot to start the new firmware.
Comments