pi@rpi-artipprog-lcd:~ $ pwd /home/pi pi@rpi-artipprog-lcd:~ $ wget https://github.com/vanvught/rpidmx512/blob/master/linux_rpi_artipprog/linux_rpi_artipprog?raw=true -O linux_rpi_artipprog pi@rpi-artipprog-lcd:~ $ ./linux_rpi_artipprog -h usage: ./linux_rpi_artipprog -i input_device [if_name:ip] -i input_device supported options: af , kb , ir and bw if_name:ip interface name (examples: eth0, wan0) or ip address af = Adafruit Bonnet kb = Keyboard ir = Infrared remote control bw = BitWizard User-Interface pi@rpi-artipprog-lcd:~ $ vi start.sh #!/bin/bash _IP=$(hostname -I) || true while [ "$_IP" == "" ] do sleep 1 _IP=$(hostname -I) || true done sleep 2 sudo ./home/pi/linux_rpi_artipprog -i af $_IP > /tmp/linux_rpi_artipprog.out pi@rpi-artipprog-lcd:~ $ chmod a+x start.sh pi@rpi-artipprog-lcd:~ $ sudo vi /etc/rc.local #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. # Print the IP address _IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi ./home/pi/start.sh & exit 0 |
|Archive| > A. Raspberry Pi Linux ArtIpProg >